Bending

AMADA

See AMADA PROMECAM STPC 200/30 painutusmasin toodeti 1989. aastal Prantsusmaalt ja alates sellest ajast moodustab 34600 töötunni. Käitatav Cybelcec DNC 7000 juhtimisseadme kaudu on see masin töötanud peamiselt 8 mm teraslehtedega. See sisaldab standardset AMADA-salvestust ja on varustatud programmeeritavate X- ja R-telgedega. See pakub suurepäraseid tingimusi, kuna kohalik insener on seda hooldanud.

This AMADA PROMECAM STPC 200/30 Bending Machine from 1989 was manufactured in France and counts with 34600 production hours since then. Operated through a Cybelcec DNC 7000 Control unit, this machine has mainly worked with 8 mm of steel sheets during the past. It incorporates a standard AMADA recording and is equipped with a programmable X and R axis. It presents perfect conditions, as it has been given maintenance by a local engineer.

AMADA PROMECAM STPC 200/30  Eestvaade

AMADA PROMECAM STPC 200/30  Vaade paremalt

AMADA PROMECAM STPC 200/30  Tööruum

AMADA PROMECAM STPC 200/30  Juhtseade

AMADA PROMECAM STPC 200/30  Nimeplaat

Sheet Metal Machinery

Press Brake

AMADA PROMECAM STPC 200/30

sold

See AMADA PROMECAM STPC 200/30 painutusmasin toodeti 1989. aastal Prantsusmaalt ja alates sellest ajast moodustab 34600 töötunni.

AMADA - PROMECAM STPC 200/30NL-BEN-AMA-1989-00001

Tehniline teave - AMADA PROMECAM STPC 200/30

Seotud tooted AMADA PROMECAM STPC 200/30